SUPER POLYURETHANE EXPRESS GLUE

A single component, fast curing polyurethane based adhesive. Also known as transparent marine glue. It has high bonding strength and water resistance.

FEATURES

_ Fast curing

_ Low pressing time

_ Transparent

_ Adhesion to many different surfaces

_ Class D4 according to DIN EN 204

_ Easy to use

_ Does not lose volume

_ Can be used on slightly damp surfaces

_ Polyurethane Prepolymer

_ Density: 1.1 g/cm³

_ Min./max. Process Temperature: 5 to 50 °C

_ Consistency: Liquid

_ Viscosity 20°C: 2000 – 4000 cps, 20°C (Spindle No 4,12 rpm)

_ Skinning Time: 5 – 15 min (23°C and 50% relative humidity)

_ Pressing Time: Minimum 15 min. – 20 min.

_ Consumption: 150ml/m²

_ Resistant to moisture and chemicals

_ Excellent bonding strength

_ Can also be used in cases of increased wood moisture

WARNING

_ Adhesive volume increases during bonding (swelling effect)

_ The adhesive joint must be protected against UV

_ The adhesive must be applied directly to the surface or spread with a putty spatula to form a thin, uniform layer

_ The surfaces to be applied must be clean and free of grease, anti-adhesive layers must be removed from the surfaces

_ The adhesive joint must not be wider than 0.5 mm, a larger joint width reduces the strength of the adhesive

_ The surfaces must be pressed within 5 minutes and remain pressed for a minimum of 15-20 minutes

_ Pressing time; It varies depending on the humidity, temperature of the environment and the porosity (absorbency) of the materials to be bonded

_ In cold weather, it is beneficial to keep the pressing time longer

_ Freshly applied adhesive can be cleaned with acetone

_ Fresh adhesive residues can be removed with PU cleaner

_ After curing, cleaning can only be done by scraping

_ Shelf life is 9 months if stored in its original closed packaging under suitable conditions

FIELD OF APPLICATION

_ Bonding wooden materials to each other, many materials such as metal, concrete, foam

_ In furniture and yacht manufacturing

_ In fixing raised floors with mechanical fixers

_ In bonding works where water resistance is required

_ To join parts in window and door manufacturing

_ To join stairs, handrails and railings

_ To join terrace and fence parts

_ To join garden and bathroom furniture

_ To join wooden parts made of softwood, hardwood, exotic wood and wooden materials

_ To join wooden parts with MDF boards for

_ To join different outdoor parts

_ To join mineral construction boards

_ To join ceramic parts

_ To join wooden parts with concrete, insulation boards, plastics and metal

USE

_ Do not use at temperatures below +5 °C

_ The parts to be bonded must be cleaned properly,
and cleaned of dust and oil

_ At least one of the surfaces must be porous for strong adhesion

_ Slightly moistening the surfaces before application will increase the adhesion performance

_ The adhesive must be applied in a thin layer to one or both surfaces

_ The surfaces must be pressed within 2 minutes

_ The surfaces must remain pressed for at least 15 min. - 20 min.

_ Freshly applied adhesive can be cleaned with acetone